BAe Systems – Aircraft Group
Approval No. – BAe/AG/10438/MAA
R05-6101 | Penetrant Flaw Detection | |||
R05-6103 | Magnetic Particle Flaw Detection – Do mag flaw detection after cadmium,
Before passivation. |
|||
R10-0701 | Passivation of Stainless Steel | |||
R10-6018 | Acid Pickling of Aluminium Alloys | |||
R10-6025 | Hot Solvent Cleaning | |||
R10-6026 | Cold Solvent Cleaning | |||
R10-6031 | Abrasive Blasting | |||
R15-6151 | Stress Relieving of Steels | |||
R15-6152 | De-embrittlement of Steels | |||
R15-6154 | De-embrittlement of Carburised Steels | |||
R15-6156 | Qualification of Chemical Treatment | R40-6978 | Paint, Primer, Low VOC – Chromated to MM0126 | |
R40-3527 | Cold Curing Primer | R40-6978 | Is direct alternative to R40-3527 (Iss 3) and can be used at production discretion | |
R40-6300 | General Paint Requirements | R60-0025 | Identification Marking of Parts and Assemblies | |
R40-6304 | Epoxide Primer and Epoxide Finish | R60-6403 | Identification Marking – Inks | |
R40-6309 | Paint, Finish, Flexible Polyurethane to MM0114 | R60-6408 | Identification Marking – Bag and Label | |
R40-6310 | Polyurethane/PTFE Abrasion Resisting Coating | R70-6439 | Phosphate of Iron and Steels up to 1450 MPa
Pre-process FD if required by drg/layout/order |
|
R40-6319 | Molybdenum Disulphide | R70-6440 | Phosphate of Iron and Steels – 1450 to 1880 MPa
Pre-process FD if required by drg/layout/order |
|
R40-6323 | Surface Coating – Temporary Protection | R70-6983 | Phosphate of Steels – Nitrided or Carbon Nitrided
Pre-process FD if required by drg/layout/order |
|
R40-6388 | Paint Qualification | R70-6984 | Phosphate of Carburised Steels
Pre-process FD if required by drg/layout/order |
|
R40-6479 | Low VOC Epoxide primer (non-chromium) | SL 4301 | Protective Treatments for Hawk Aircraft |