Approval No. FM00236
AMS 03-2 Cleaning and preparation
AMS 03-4 Pre-treatment and protection of steel >1450MPa
AMS 03-9 Silver Plating – Only Copper based materials with no solder joints
AMS 03-11 Phosphating
AMS 03-18 Chromate conversion of aluminium
AMS 03-19 Cadmium Plating
AMS 03-25 Sulphuric acid anodising
Def Stan 03-12 Chromate passivation of brass
Def Stan 03-24 Chromic acid anodising
Def Stan 03-32 Pre-treatment and painting
Def Stan 80-31 Paint, finishing, alum
Def Stan 80-54 Paint, fuel resistant, gloss
Def Stan 80-39 Paint, interior of fuel tanks
Def Stan 80-124 Paint, priming, stoving
Def Stan 80-131 Paint, alum, heat resisting
Def Stan 80-225 Paint Military vehicles and equipment IRR gloss non aircraft
DTD 904 Cadmium Platting
DTD 939 Silver plating (Thread gauge required as per spec)
--- American Specifications ---
AMS-QQ-P-416E Cadmium Plating (<1100MPa)
AMS 2410 Silver Plate – Nuts only
AMS 2411 Silver Plate – Only allows low alloy steels, martensitic or precipitated hardened corrosion resistant steels (CRES)
AMS 2412 Silver Plate
AMS 2470 Silver Plate
AMS 2471 Sulphuric Anodise
AMS 2472 Sulphuric Anodise
AMS 2473 Chemical Conversion of Aluminium
AMS 2481 Phosphate
AMS 24700F Passivation
ASTME 1417 Penetrant Flaw detection – Can do type 1 method A or D (level I,II,III)
MIL-A-8625 Anodise, Sulphuric & Chromic
MIL-DTL-5541 Alocrom
MIL-PRF-40610 Solid Film Lubricant
--- British Standards ---
BS EN 2516 Passivation (NOTE: C1, C2, C4 ONLY – C1 and C4 is for aerospace only)
BS EN 2101 Chromic Acid Anodising
BS EN ISO 7599 Anodising
BS EN ISO 9717 Phosphating
BS EN ISO 15730 Electropolishing
Need some help?
If you have any questions in relation to Approvals and Scopes please use the form and a member of our team will be in touch.
