Approval No. RALOA/00204/1
AVP 2-024 Swab Degreasing with Solvent Cleaners
AVP 3-003 Epoxy Primer to Interior and Exterior Surfaces
AVP 3-006 Polyurethane paint scheme
AVP 3-008 Flexible Permeable Finish to Interior Surfaces
BAEP 0002 Chromic Acid Anodising – PFD only when req. by drg/order
BAEP 0003 Sulphuric Acid Anodising
BAEP 0004 Chromate Conversion (Alocrom)
BAEP 0006 Phosphating of Steel
BAEP 0007 Colour Anodising (Chromic)
BAEP 0013 Passivation of Corrosion Resistant Steels (not 440C material)
BAEP 1516 Chromate Passivation of Cadmium and Zinc
BAEP 3504 Application and Stoving of Polyurethane (Replaced by AVP 3-006 if work is for Bae Regional)
BAEP 3505 Application of Cold Cured Epoxide
BAEP 3506 Application and Stoving of High Temperature Stove Enamel on steel
BAEP 3508 Application and Stoving of Acrylic
BAEP 3512 Cold Curing Epoxide Primer
BAEP 3513 Application and Stoving of Anti-Fretting Primer
BAEP 3515 Application and Stoving of Erosion Resistant Polyurethane
BAEP 3519 Application and Stoving of Heat Resistant Stove Enamel
BAEP 3524 Application and Stoving of Polyurethane Clear Lacquer
BAEP 3527 Application of Cold Cured Adhesion Primer
BAEP 3528 Application of Flexible Permeable Coatings
BAEP 3529 Etch Primer, Polyurethane Prime and Finish
BAEP 3532 Application of Low Temperature Stove Enamel
BAEP 3536 Application and Stoving of Abrasion Resistant Coatings
BAEP 3544 Application and Stoving of Bonding Primer as an erosion Resistor
BAEP 3546 Etch Primer, Polyurethane Prime and Finish
BAEP 3547 Application and Stoving of Anti-Erosion Coatings
PS 23-3-9 Electropolishing of Stainless Steel
PS 2051 Dry Film Lubricant – Molycote 106
PS 2068 Alocrom 1200
PS 2089 Passivation of Stainless Steel (not 440C material)
PS 2110 Chromic Acid Anodising – PFD if req. by drg/order before anodising
Need some help?
If you have any questions in relation to Approvals and Scopes please use the form and a member of our team will be in touch.
