BAe Systems Regional Aircraft
Approval No. RALOA/00204/1
| AVP | 2-024 | Swab Degreasing with Solvent Cleaners | ||||
| AVP | 3-003 | Epoxy Primer to Interior and Exterior Surfaces | ||||
| AVP | 3-006 | Polyurethane paint scheme | ||||
| AVP | 3-008 | Flexible Permeable Finish to Interior Surfaces | ||||
| BAEP | 0002 | Chromic Acid Anodising – PFD only when req. by drg/order | ||||
| BAEP | 0003 | Sulphuric Acid Anodising | ||||
| BAEP | 0004 | Chromate Conversion (Alocrom) | ||||
| BAEP | 0006 | Phosphating of Steel | ||||
| BAEP | 0007 | Colour Anodising (Chromic) | BAEP | 3528 | Application of Flexible Permeable Coatings | |
| BAEP | 0013 | Passivation of Corrosion Resistant Steels (not 440C material) | BAEP | 3529 | Etch Primer, Polyurethane Prime and Finish | |
| BAEP | 1516 | Chromate Passivation of Cadmium and Zinc | BAEP | 3532 | Application of Low Temperature Stove Enamel | |
| BAEP | 3504 | Application and Stoving of Polyurethane
(Replaced by AVP 3-006 if work is for Bae Regional) |
BAEP | 3536 | Application and Stoving of Abrasion Resistant Coatings | |
| BAEP | 3505 | Application of Cold Cured Epoxide | BAEP | 3544 | Application and Stoving of Bonding Primer as an erosion Resistor | |
| BAEP | 3506 | Application and Stoving of High Temperature Stove Enamel on steel | BAEP | 3546 | Etch Primer, Polyurethane Prime and Finish | |
| BAEP | 3508 | Application and Stoving of Acrylic | BAEP | 3547 | Application and Stoving of Anti-Erosion Coatings | |
| BAEP | 3512 | Cold Curing Epoxide Primer | PS | 23-3-9 | Electropolishing of Stainless Steel | |
| BAEP | 3513 | Application and Stoving of Anti-Fretting Primer | PS | 2051 | Dry Film Lubricant – Molycote 106 | |
| BAEP | 3515 | Application and Stoving of Erosion Resistant Polyurethane | PS | 2068 | Alocrom 1200 | |
| BAEP | 3519 | Application and Stoving of Heat Resistant Stove Enamel | PS | 2089 | Passivation of Stainless Steel (not 440C material) | |
| BAEP | 3524 | Application and Stoving of Polyurethane Clear Lacquer | PS | 2110 | Chromic Acid Anodising – PFD if req. by drg/order before anodising | |
| BAEP | 3527 | Application of Cold Cured Adhesion Primer | ||||