MOD Defence Standards
Approval No. FM00236
AMS 03-2 | Cleaning and preparation |
AMS 03-4 | Pre-treatment and protection of steel >1450MPa |
AMS 03-9 | Silver Plating – Only Copper based materials with no solder joints |
AMS 03-11 | Phosphating |
AMS 03-18 | Chromate conversion of aluminium |
AMS 03-19 | Cadmium Plating |
AMS 03-25 | Sulphuric acid anodising |
Def Stan 03-12 | Chromate passivation of brass |
Def Stan 03-24 | Chromic acid anodising |
Def Stan 03-32 | Pre-treatment and painting |
Def Stan 80-31 | Paint, finishing, alum |
Def Stan 80-54 | Paint, fuel resistant, gloss |
Def Stan 80-39 | Paint, interior of fuel tanks |
Def Stan 80-124 | Paint, priming, stoving |
Def Stan 80-131 | Paint, alum, heat resisting |
Def Stan 80-225 | Paint Military vehicles and equipment IRR gloss non aircraft |
DTD 904 | Cadmium Platting |
DTD 939 | Silver plating (Thread gauge required as per spec) |
American Specifications | British Standards | |||
AMS-QQ-P-416E | Cadmium Plating (<1100MPa) | BS EN 2516 | Passivation (NOTE: C1, C2, C4 ONLY – C1 and C4 is for aerospace only) | |
AMS 2410 | Silver Plate – Nuts only | BS EN 2101 | Chromic Acid Anodising | |
AMS 2411 | Silver Plate – Only allows low alloy steels, martensitic or precipitated hardened corrosion resistant steels (CRES) | BS EN ISO 7599 | Anodising | |
AMS 2412 | Silver Plate | BS EN ISO 9717 | Phosphating | |
AMS 2470 | Silver Plate | BS EN ISO 15730 | Electropolishing | |
AMS 2471 | Sulphuric Anodise | |||
AMS 2472 | Sulphuric Anodise | |||
AMS 2473 | Chemical Conversion of Aluminium | |||
AMS 2481 | Phosphate | |||
AMS 24700F | Passivation | |||
ASTME 1417 | Penetrant Flaw detection – Can do type 1 method A or D (level I,II,III) | |||
MIL-A-8625 | Anodise, Sulphuric & Chromic | |||
MIL-DTL-5541 | Alocrom | |||
MIL-PRF-40610 | Solid Film Lubricant |